Use a threaded adapter if required. When using a threaded adaptor, make sure it is fully inserted into the antenna.
Fit the antenna onto a pole. Make sure the rubber adapter is flush with the pole. If there is any of the yellow threaded adaptor showing, it is not mounted correctly.
Note - If you are using an auxiliary battery, connect a micro USB cable to the antenna. The micro USB connector port is located underneath the rubber tab on the bottom of the antenna.
If you are using the auxiliary battery, attach the battery mount to a pole by inserting it over the top of the pole before you attach the antenna.
Insert the battery into the battery mount with the USB ports facing down.
Connect the USB cable, and push the cable into the groove on either side of the battery mount.
Attach your handheld, tablet, or phone to the pole using an appropriate bracket and connect the USB cable to the device:
Use the Trimble Catalyst DA1 digital antenna with Android devices that are certified USB On-The-Go with Qualcomm® Snapdragon™ 800 processors or better. Trimble has tested and validated the following devices for use with the Trimble Catalyst DA1 digital antenna:
For further device compatibility information, refer to your Trimble Mobile Manager application.
To receive high accuracy positions on your device using the Trimble Catalyst DA1 antenna, download the Trimble Mobile Manager application from Google Play.
For further information on Trimble Catalyst subscriptions and using Catalyst enabled applications, refer to your Trimble Mobile Manager application.